Conventional Training

DRILNET is specialized in technology transfer in the upstream and downstream oil activities

Overview

Training is the main activity of the company. In the scope of conventional training DRILNET delivers classroom training, on-the-job training and provides “train the trainer” programs.

Our company develops drilling training programs and trains directly engineers and technicians of international companies such as: SCHLUMBERGER, PRIDE FORASOL, TOTALFINAELF, GAZ DE FRANCE, SONATRACH, ADCO; or through our clients such as “Ecole Nationale Supérieure des Pétroles et des Moteurs” (ENSP MFI), “French Petroleum Institute” (IFP), PRIDE FORASOL training centre, NexT, ENI Corporate University, ENI / KCO, etc..

Our instructors are experienced professionals daily involved in operations.

Our training tenders concern all activities of oil industry: oil and gas and energy project management, E&P, Surface Production, Refining, Safety, Logistics, etc. They can be in-house trainings or trainings within our clients’ facilities.
We have also special programs for on-the-job trainings for drillers, drilling supervisors, superintendents, engineers…
Depending on your needs, you can choose a course in our training catalog or our specialists will help you to design and to develop customized training programs.

DRILNET’s team can lead your staff’s knowledge evaluation in order to adjust the training programs to your company targets.
We help also to put into operation or to work with existing training centers and to provide with the following certifications: IWCF, STCW 95, IADC, OPITO, NEBOSH, IOSH Managing Safety, IMI Awards, AWS, LEEA, Emergency First Response, American Safety & Health Institute, Chartered Institute of Environmental Health, NFPA, National Safety Council, Crane Certification Association of America, IASST, UK Spill, etc.

Some examples of our achievements:

  • from 1992 to 2005, DRILNET team members developed a manpower plan after auditing and evaluating all the drilling crew of SONATRACH. DRILNET team members also implemented and executed a training schedule for more than 200 SONATRACH Drilling Division employees at Hassi Messaoud (Algeria), and trained trainers.
  • From 2003 to 2004 and in 2006 DRILNET provided Drilling Fluids and Cement training course for ENI Italy engineers (2 x 16 weeks).
  • From July 2008 our company is setting up and developing a Drilling Supervisor / Engineer training programme through a joint venture with a local sponsor dedicated to all future TOTAL worldwide local supervisors.

During last 5 years we have worked on several projects for ENI CORPORATE UNIVERSITY (Kazakhstan, Iraq, Italy), RST GLOBAL SOLUTIONS (Singapore, Netherlands, USA), POLITECHNICO (Italy), OMV-PETROM (Romania), TNK-BP (Russia), DRILLMEC (Italy, Iraq).

DRILNET is specialized in technology transfer in the upstream and downstream oil activities.

Among our references are companies like:

 

Company Company Business Unit Or Project Period & Location Services
DRILNET France Pau, France,Biannual April / November DRILNET provides the training course “Introduction to rotary drilling”. Till now – 150 persons trained.
ADCO UAE Abu Dhabi, 2005 We have provided basic and advanced training courses in E&P for Drilling Supervisors and Engineers:·         Drilling Engineering·         Drilling Technologies·         Common Drilling Problems

·         Stuck Pipe Prevention

·         Fluids & Cements technologies

ANPE / ASSEDIC France France, October 2007 Provided the training course “Introduction to rotary drilling”.
BOUMERDES University Algeria Algeria Setting up of the Training Centre:-       Purchase and installation of the simulator-       Working out training courses-       Courses delivery

–       Train the trainers

Obtaining of the IWCF certification of the training centre, providing Well Control training courses with the IWCF certification

BPS France France, 2004-2005 Recruitment, initial training and “On-The-Job training” for Drillers and Assistant Drillers, Drilling course for Roughneck and Derrickman level.
COFOR France Maisse, France, 2010 Provided training for Drillers and Assistants Drillers
DIESEL Joint Venture Romania, 2008 Engineering for the creation of Fire Fighting & HSE Training Centre in Ploiesti
DIETSMANN France Marseille, France, since 2005 DRILNET provides Basic and Advanced Fire Fighting Training on the regular basis
DRILLMEC ItalyIraq March 2012 DRILNET provided the instructor for DRILLING MATERIALS training course for Company’s technicians
ENI CORPORATE UNIVERSITY (ECU) 2003-2004-2005 1.   KCO project: design and presentation of several training courses in E&P.2.   Iraqi Company & NAOC: design of two courses: Reservoir Engineering and Evaluation of the Petroleum Potentials.
CORPORATE UNIVERSITY (ECU) 2003-2004 / 2006 DRILNET provided Drilling fluids and cement training course for ENI engineers (2 x 16 weeks) to become Mud & Cement Supervisor and Engineers
KCO Kazakhstan, 2005 – 2006 – 2007 1.   Reservoir Engineering & Production2.   Drilling Technology3.   Production & Well Testing
CORPORATE UNIVERSITY (ECU) IRAQ, from January 2013 Geosciences and Well Area Training servicesProduction  / Maintenance / Facilities Training services
CORPORATE UNIVERSITY (ECU) ITALY, from January 2013 Geosciences and Well Area Training services
FORASERV Port Gentil, GabonDecember 2013January 2014 DRILNET provided Well Control training course with the IWCF certification to 20 trainees
GRUP SERVICII PETROLIERE IWCF TC Romania, 2008 – 2010 DRILNET is setting up the entire training centre to provide fire fighting, IWCF, maritime safety trainings. Since June 2009 the training centre has been accredited IWCF and, currently runs IWCF Well Control Surface BOP training courses.
Constanta, Romania,October 2009 “How to be Trainer” training course delivered by DRILNET to the future GSP’s trainers
Constanta, Romania,October 2009 “Project Management for Success” training course delivered by DRILNET to the future GSP’s trainer
GTSC UAE Abu Dhabi, 2005 DRILNET provided Well Control training course with the IWCF certification as well as HSE training courses
HALLIBURTON Algeria Division Algeria, 2007-2008 Drilling training courses·         Hole problems while drilling·         Fishing·         Coiled tubing technologies

·         Tubular design (drill pipe, casing and tubing design)

IFP / ENSPMFI / PRIDE PRIDE 1999-2002 DRILNET assisted the company PRIDE in the development and the implementation of the training courses for drilling supervisors.
IPC Abu Dhabi Worldwide, Since 2005 Well Control training courses with the IWCF certification
ISS Boots & Coots Astana, KazakhstanApril 2010 DRILNET provided training course “Drilling contracts and Negotiations”
LAINE MECANIQUE Pau Pau, France, April 2009 DRILNET provided 3-day training course “Introduction to the Petroleum Industry” (9 persons)
OMV – PETROM Romania Bucharest, RomaniaOctober 2012 DRILNET provided “Open & Cased Hole Well Testing training” to 32 young engineers
PLOIESTI UNIVERSITY FORADEX – ROMPETROL – PETROM – OMV 2006 Engineering for the creation of the well control training centre at the Ploesti University.
PRIDE ENI Kazakhstan 2000-2004 DRILNET designed and presented the training course in marine safety according to the International legislation (STCW95) adapted to the equipment and the personnel of the company. This course was approved by the French Maritime Ministry
STAPEM 2003 We designed and implemented two training courses: HLO (Helicopter Landing Officer) and HDA (Helideck Assistant).
TOTAL 2004 DRILNET implemented the training courses for ENMM (Ecole Nationale De La Marine Marchande):  DPO (Dynamic Positioning Operation) and CSO (Company Security Officer).
POLITECNICO DI TORINO Italy April 2012 DRILNET performed the DRILLING & COMPLETION Training seminar to 15 students
ROMPETROL Romania Romania, 2008 Training project for the drilling rig team on Top Drive system (Theoretical and “On-The-Job training”).
RST Global Solutions Singapore NOBLE SingaporeApril 2011 DRILNET provided the Stuck Pipe Prevention training course for NOBLE Drilling staff
NOBLE Netherlands, November 2011 DRILNET provided Stuck Pipe Prevention and Volumetric Stripping training courses for NOBLE Drilling Staff – (2 x 2-day course for 10 trainees)
NOBLE Lafayette, USAJanuary 2012 DRILNET provided Stuck Pipe Prevention and Volumetric Stripping training courses for NOBLE Drilling Staff – (4 x 2-day course for 7 trainees)
NOBLE Netherlands,March – April 2013 DRILNET provided Stuck Pipe Prevention and Volumetric Stripping training courses for NOBLE Drilling Staff – (3 x 4-day course for 19 trainees)
SCHLUMBERGER group NExT Training Center 2001-2002 We designed training courses illustrated with documents and slides and trained Drilling Supervisors and Engineers of IPM (Integrated Project Management).
Schlumberger Melun 2005 – 2006 – 2007- 2008 Setting up of the Training Centre:-       Purchase and installation of the simulator-       Working out training courses-       Courses delivery

–       Train the trainers

Obtaining of the IWCF certification of the training centre, providing Well Control training courses with the IWCF certification

SERCO Pau Pau, France,October 2007 DRILNET provided training course “WHIPSTOCK & INSTRUMENTATIONS”
SINCOR Venezuela Venezuela, 2004-2005 We designed a training course in safety during the supervision of the stopping of the refining production unit.
SONATRACH Drilling Division Algeria, 1990-2005 DRILNET has taken part in recruitment and training of more than 300 engineers (Drilling Supervisors / Superintendents and Engineers) working for the drilling division.
Production Division Algeria, 2003-2004 DRILNET designed several training courses:·         Industrial technologies·         Electrical and Mechanical Maintenance·         Automatism

·         Surface production / Refining

SPIE Oil & Gas Services Middle East Yemen, 2008-2009 DRILNET designed training programs “Drilling Supervisor / Engineer” and implemented this 19-week course from “beginner” level to Drilling Supervisor / Engineer level for TOTAL, OMV, NEXEN, and HUNT
Middle East Istanbul, TurkeyJuly 2010 IWCF Well Control training course for Drilling Supervisors organized for South Oil Company and North Oil Company of Iraq)
Africa Pointe Noire, CongoAugust 2010 IWCF Well Control training course for Drillers organized for SNPC Congo
Africa Pointe Noire, CongoJuly 2011 IWCF Well Control Surface BOP training course for CAROIL, NABORS Congo and SNPC Congo
STREAM OIL &GAS Ltd. Tirana, AlbanyOctober 2008 DRILNET provided training course “Introduction to Rotary Drilling and Coiled Tubing”
TNK-BP TNK Management Tyumen, RussiaJuly- September 2010 DRILNET provided the customs Well Design training course dedicated to the young Drilling Engineers and Supervisors
TNK Management Tyumen, RussiaJuly-August 2011 DRILNET provided the customs Tubing training course dedicated to the young Drilling Engineers and Supervisors
TNK Management Tyumen, RussiaEnd  2011 DRILNET is requested to provide the customs FLUIDS training course (16 Young Drilling engineers)
TNK Management Tyumen, RussiaMay 2012 DRILNET provided the customs Tubing training course dedicated to the young Drilling Engineers and Supervisors
TNK Management Tyumen, RussiaSeptember 2012 DRILNET provided the customs WORKOVER & COMPLETION FLUIDS training course (25 skilled + 18 young Drilling engineers)
TNK Management Tyumen, RussiaDecember 2012 DRILNET is currently providing the customs WORKOVER & COMPLETION FLUIDS training course (17 young Drilling engineers)
TOTAL  GYRASOL 2002-2003 HSE training courses
DAALIA 2005 HSE training courses
LACQ Training Centre Lacq, France,May 2006 1-day training “Deposits, wells, pumping”
LACQ Training Centre Lacq, FranceJune 2006 20-day training: Commissioning, flow measurement, production processes, simulation tools, production measures
2007 Refresh courses in Mathematics, Physics & Hydrocarbons Chemistry
TOTAL SYRIA Damascus, SyriaNovember 2010 DRILNET provided the Drilling Engineering training course for operational staff of TOTAL (10 Drilling supervisors and engineers)
TOTAL SYRIA Istanbul, TurkeyJanuary 2012 DRILNET provided once more the Drilling Engineering training course for operational staff of TOTAL – 10 Drilling supervisors and engineers
WELL EQUIPMENT INTERNATIONAL SERVICES (now DELTAWELL) Italy Fiorenzuola d’Arda,June – September 2012 DRILNET provided 6 “DRILLING FOR TECHNICIANS & SAFETY ON THE DRILLING RIG” training sessions for the Company’s operators, engineers and administrative staff (50 persons trained)
XEROX Services  OMV-PETROM Bucharest, RomaniaOctober 2013 DRILNET delivered “Introduction to Drilling Bits” training – 16 trainees